After using your system, complete your swim day by properly storing all components.
A. Make sure the charger is plugged into the wall and the cord is inserted firmly into the charger.
B. Return all Bands to the Charger.
C. Rotate the swivel clamp over each Band to hold it in place.
D. Place the SEAL SwimSafe™ Hub into the Charger. Indicator lights will appear.
TURN OFF THE SYSTEM by pressing and holding the button on top of the Hub until the Hub light turns solid RED. Press and hold only until you hear the Hub start to beep. The System will alarm for 5 seconds. This will turn off the Hub and all Bands paired to the Hub.
NOTE: The System should be turned OFF to charge.
NEVER hold the button down or press it again once the shut down process has started (as the Hub is blinking BLUE, then PURPLE, then ORANGE).
Video instructions for turning off your System.